I am installing a tranny temp gauge. I have the manifold to put on the line going into the tranny. Wich side is the supply side Passenger or Driver?
Thanks,
Tim
why not run the sensor from the line coming out of the heat exhanger off the radiator? i would run the sensor on the return line so you get as accurate a reading as possible on the temp of the fluid going into the trans.
My question is what side the the line that is the hottest. Wich one is comming from the tranny into the radiator. I want the hottest temp before it is cooled. Is that line on the pass or driver side?
Thanks
Tim
I think you may be able to take one line off the side of the tranny.
Have someone start the car,and if the fluild come out the tranny.
that would be the line your looking for.
If the fuild comes out of the line. its coming from the radiator.