PDA

View Full Version : Need Help with tranny



SCPilot
10-22-2003, 06:03 PM
I am installing a tranny temp gauge. I have the manifold to put on the line going into the tranny. Wich side is the supply side Passenger or Driver?
Thanks,
Tim

SCPilot
10-23-2003, 11:19 AM
ttt

SCPilot
10-24-2003, 05:59 PM
come on can'nt someone help me?

Randy N Connie
10-24-2003, 06:51 PM
I for one am not sure what you are asking.Maybe you could reword your post.

I have a 90 auto and the coolent lines are on the passenger side of the tranny.
I have two of them going to the radiator.

I don't know any thing about your temp guage so I cannot answer your ?
If you write more about what you have .I am sure someone will jump in
and help.

RANDY

obucina
10-24-2003, 06:55 PM
why not run the sensor from the line coming out of the heat exhanger off the radiator? i would run the sensor on the return line so you get as accurate a reading as possible on the temp of the fluid going into the trans.

joseph

SCPilot
10-25-2003, 07:15 AM
My question is what side the the line that is the hottest. Wich one is comming from the tranny into the radiator. I want the hottest temp before it is cooled. Is that line on the pass or driver side?
Thanks
Tim

Randy N Connie
10-25-2003, 09:26 AM
I think you may be able to take one line off the side of the tranny.
Have someone start the car,and if the fluild come out the tranny.
that would be the line your looking for.

If the fuild comes out of the line. its coming from the radiator.

RANDY

SCPilot
10-25-2003, 10:01 AM
Yep I knew it was comming to this. I just did not want to make a mess.
Thanks
Tim