MartianBob
Registered User
I have read many posts about repairing the door hinges on our cars. But I need to Replace my drivers side lower hinge; I'm sitting on a new hinge that I cannot return.
I took a stab at it this weekend and after removing some interior panels and a couple wire harness brackets I still couldn't get to a point where I could even see the nuts. They are completely burried behind a nest of wire harnesses, brackets, etc.
I'm not positive I even need to get back there. Are these nuts held in place with clips or are they going to fall down into the abyss when I remove the hinge bolts?
If anyone is familiar with replacing the Drivers Side Lower Hinge please advise.
thanks
MB
I took a stab at it this weekend and after removing some interior panels and a couple wire harness brackets I still couldn't get to a point where I could even see the nuts. They are completely burried behind a nest of wire harnesses, brackets, etc.
I'm not positive I even need to get back there. Are these nuts held in place with clips or are they going to fall down into the abyss when I remove the hinge bolts?
If anyone is familiar with replacing the Drivers Side Lower Hinge please advise.
thanks
MB