Pictures of fittings used on mgnport plenum please

Could someone post some pictures of the fittings you used for the installation of the magnaport inlet plenum. I just wanted to see where you hooked up the four lines and what type of extra tubing you used to hook it up. The one line that conects to the rocker cover looks like it needs a certain angle etc and just want to see where it needs to be cut etc.

Thanks
Eric

Here is what I did. On the MP inlet the far left one goes to the PVC/fuel canister ( I had to put in a longer hose). The next one goes to the vacuum tree. I ended up deleting the third one from the right, but it would normally go to the fitting on the intake plenum. The one in the front (1/8 NPT) was also deleted. The picture does not show the completed vacuum set up but the above tells what I did from the picture.

Good Luck
Mike Tuck
Super XR7

Perfect. thank you that's the last step to having my car back on the road again. Looking forward to it!

Eric

Sc Top

Super XR7: That is a really cool looking sc top. Did you make it yourself or have it made?

Made it myself.

Mike

that is a pimpin' sc top. also, what throttlebody is that?