PDA

View Full Version : boost gauge hose



cato
10-29-2003, 05:03 PM
I had a bad exhaust leak that melted my hose in half, now I can find the half that comes out of the plenum, but not the other half, so where does it enter the firewall??

tbird88
10-30-2003, 08:56 AM
Down below the main harness connection on the firewall. Need a pic?

'bird

cato
11-03-2003, 05:07 PM
wouldn't hurt, thanks a lot

tbird88
11-04-2003, 07:44 AM
Here ya go...

The black arrow thingie is pointin' at the hole, it's right under the main harness connector (the big round white connector). Hole is about 5/8-3/4 in diameter.

'bird

SCme
11-08-2003, 07:54 AM
Cato,

are you replacing the whole hose or going to fit the two back together? If putting back together, let me know what you use as mine has been split for couple months and I have yet to find anything. Tried auto parts stores, motocycle stores, bike stores looking for something to splice that small hose back together. It mostly because I don't want to take the dash apart.

cato
11-08-2003, 11:15 AM
no, I'm just replacing it

MIKE 38sc
11-09-2003, 10:44 AM
Originally posted by SCme
Cato,

are you replacing the whole hose or going to fit the two back together? If putting back together, let me know what you use as mine has been split for couple months and I have yet to find anything. Tried auto parts stores, motocycle stores, bike stores looking for something to splice that small hose back together. It mostly because I don't want to take the dash apart.

Simple.....Go to hardware store and get a hose barb coupling, they generaly have them in all sizes. Put a zip tie on each side to clamp the hose. ;)