PDA

View Full Version : Forged Rods and Pistons



charged92
11-17-2003, 02:26 PM
Can anyone give me some ideas on where to buy forged rods and pistons for our cars. I have a few but the more sources the better. If you have any part#'s they would be appreciated as well. Thanks in advance.

David Neibert
11-17-2003, 02:47 PM
http://www.sccoa.com/forums/showthread.php?threadid=36943

supercatxr7
11-17-2003, 05:25 PM
I can set you up with a set of CAT H Beam Super Race rods if interested.

supercatxr7@yahoo.com

charged92
11-18-2003, 08:19 PM
What are we looking at for cost? Is there any custom machine work needed?:D

supercatxr7
11-18-2003, 10:51 PM
The rods are CAT H Beam Super Race Rods, 5.956" in length, and rod journal size is the same as our crank. To utilize the rods, due to them being a tad longer than stock, you will need to order custom pistons. Pistons can be had from many manufacturers such as Diamond, Ross, and Wiseco. There are many in the club already utilizing these rods in their builds, including myself. For more info, please contact me via email:

supercatxr7@yahoo.com

Mike8675309
11-19-2003, 10:18 AM
Check that thread that David linked to. It has valuable info in it.