fastsc92
Registered User
I'm in a bind once again. I ordered Coy's cam, but now its delayed at least two weeks. I called comp cams many times and no one knows what they are talking about. I finally got someone good at comp cams to talk to. His name is Matt and he knows these motors fairly well. He now said that i should go with a .460 lift, 204/214 durration. He said that it would work with stock pushrods. I also informed him about coy miller and that he goes to a .500 lift. He seemed very surprised that it would be that high, but he had the ability to look up previous orders. Most of the cams that coy ordered were .493 lift, 210/220 durration. He told me that the best route to take was to send the cam in attention to him, and they would profile the cam to see what the stock specs are, then figure out if he could get me a higher lift, simliar to coy's cam. I was very happy with Matt and how much he helped me out. Total price for the regrind shipped back to me would be $135. He said that the stock lifters should take up alot of the pushrod slop, that i could use the stock one with a .460 lift. He said as the lift gets larger around a .493 lift that i might need to go a little bigger. He told me that he would personally measure the base circle before and after and add what he took off to the pushrod. Now i'm in a bind of who to get the cam off of, coy or comp. I dunno what to do anymore and i'd hope maybe you guys can help me out once again.