PDA

View Full Version : Passenger Valve Cover



Digitalchaos
11-24-2003, 03:05 PM
I am attempting to remove the valve cover on the passenger side to replace the leaking gaskets. However, this cover has numerous fuel, A/C, and other hoses over the top of it. The A/C compressor is currently removed to allow for access. Can the cover be lifted with these hoses on top, or must more be removed?

Thanks for your help.

pearl95sc
11-24-2003, 03:15 PM
I'd say if it's in the way, move it. It will make for a much easier install. Then again, if you can get the valve cover up about an inch, you should be able to put the new gasket on with little difficulty.

SCvidar
11-25-2003, 10:41 AM
Hi.
My gasket was leaking, it was the bolts that came loose.
Gaskets are reusable, don't overtighten.
Vidar.