Fixing Tranny Lines?

Thomas A

Registered User
I was wondering if anyone had a good way of fixing a tranny line, other then having it brazed. I've got one that is spewing Mercon V all over the place. It looks like the previous owned had a 6" section of hose over the line with hose clamps on each end as a temporary fix before. Any idea on what might work well? Thanks.

Thomas
 
Well we used a section of hose on my NA V6 long enough to overlap the metal lines by about 1-1.5" and then double clamped each end. That was about 2.5 years ago and its still holding fine....
 
The trans cooler pump only runs about 30 psi, so using hose is fine, just make sure it is high temp hose, not fuel line hose.
 
Back
Top