PDA

View Full Version : Looking for 5-Speed Owners with Clutch Problems



Rich Thomson
12-05-2003, 03:23 PM
As part of the T5 swap I have designed a special clutch plate that allows you to replace your stock clutch master cylinder and install a 1" bore aftermarket unit. Fully adjustable no modifications to the car are needed. If you are having problems with your factory master cylinder e-mail me as my project car won't be running for a few more months. [email protected]

http://www.mn12performance.com/mn12parts/shifterbox/clutch-pedal.JPG

MercsSC
12-06-2003, 06:17 AM
don't see me breaking the nipple off that... to the rezivour like I did on the stock unit ...dave

Rich Thomson
12-07-2003, 11:48 AM
Just got the clutch plate finished. The stainless steel plate provides the mounting surface for the master cylinder. Now any 5-Speed can be retrofitted with the master cylinder. Makes the clutch install easy and universal. The three holes in the plate slide over the three studs attaching the clutch pedal to the firewall. Pictures of the plate mounted to the firewall will come. 6in of snow on the last two days :(

http://www.mn12performance.com/mn12parts/shifterbox/master-cylinder.JPG

http://www.mn12performance.com/mn12parts/shifterbox/clutch-plate.JPG