Rotors/hubs combination - sizes?

iwannanSC

Registered User
Hello,

I have an '89 SC and my front hubs are shot. I bought rotors and pads a few months ago, but now am thinking about upgrading to the '91+ hubs because they are significantly cheaper. I know that the hole in the center of the rotor must be larger to accomodate the '91+ hubs.

I measured the rotors I have, and the hole in the center is 2.5" in diameter. Does anyone know if this is large enough to be used in conjunction with the newer hubs?

If not I guess I will take them back and get rotors for a '91+ car.

Thanks,
Matt
 
Matt, I don't have any stock rotors around here to measure ... but if your rotors are a loose fit with a gap over the centre bore of your present hubs, than you should be OK to go with 91-up hubs.



cheers
Ed Nicholson
SCCoO
 
Back
Top