correct plug gap and wires

correct plug gap and wires with mods

been doing searches all night and havent found much. am replacing the plugs a wires this weekend wondering what is the best to gte for plugs and wires also what gap should i use. for the mods i am doing: ported exhasut manifolds, no cat, full flowmaster exhaust, intake tube with cone filter, bullet proof tranny rebuild with 2000 stall, 190lph fuel pump, 10% OD pulley. plan on getting a bigger maf and tb , maybe UD pulleys some time in the spring. part #'s for wires would be greatly appreciated

thanks
ryan

Keeping it simple...

Go with the stock motorcraft double platinum plugs all around. Autolite also makes the equivilent. You may want to run one heat range cooler with the 10% pulley.

Stock plug gap is .052"-.056". You could gap your plugs to that, or slightly undergap them say around .045"-.050".

You should go with stock motorcraft wires or Ford Racing performance wires. Magnecore wires will also do you good.

Don't go with the Jacob's like I did. I had to undergapp my plugs to .035".