View Full Version : Hello Folks
SCYALTR
12-13-2003, 01:01 AM
Hello,
Would anyone happen to know of anywhere or anyone that would be selling a long block with less than 100k on it?
I have this bad feeling that Big Blue may need a Heart transplant in the near future. I would like to buy a used engine and take my time to rebuild something with a little more get up and go lol.
Thanks,
D Rainer
SUMFEAR
12-13-2003, 10:53 AM
I have the original engine from my cougar. It has 187k Still ran great. Did have lifter noise.
Email daboyko@comcast.net
Derek
hwycoper
12-14-2003, 10:09 PM
Dave,
I have an 89 5 speed block with about 110,000 on it, a pair of heads with a 72,000 on them plus other parts if interested. I was going to keep them for a future project but I'm changing directions with my SC.
Mark
SCYALTR
12-15-2003, 01:12 AM
Hello Boyz,
Thanks Derek, I am looking for something that I can just swap into my car and keep running because it is my daily driver.
Mark, do you have the complete long block or would I have to put it together?
I would rather not swap too much from my engine.
Ok now, let's talk turkey:) How much are you looking to get for the engine?
Thanks,
D Rainer
mrsGONE14S
12-15-2003, 06:31 PM
No spare engine, just wanted to say hi!
Wendy
SUMFEAR
12-15-2003, 08:44 PM
Dave,
I thought You were looking for an engine to rebuild. My bad:D
Derek
hwycoper
12-17-2003, 01:06 PM
Sorry Dave,
The engine is in pieces and needs rebuilding.
Mark
SCYALTR
12-17-2003, 05:50 PM
Hey Mr & Mrs 14S,
Thanks for the the greeting :)
I sure do miss you two.
Laterz,
D Rainer
SCYALTR
12-17-2003, 06:30 PM
Hello Mark,
When you say in pieces do you mean that you have a bare block?
Is the lower end complete, and the heads separate?
How many miles on the lower end?
I have a nice long break coming up (Love working for the School District he he), and will be using the time to do a little surgery on Big Blue.
Thanks,
D Rainer
hwycoper
12-17-2003, 10:46 PM
Dave,
The bottom end is still together. It has about 110,000 on it. It came out of Nate's old car. The heads are from my engine. They have about 72,000 on them. I blew a head gasket at the back of the # 3 cylinder on my engine. So I took the heads off from Nate's old engine and Jim Sr. worked them over for me.
I don't plan on building another engine for my car.
Mark
SCYALTR
12-18-2003, 09:22 AM
Hello Mark,
Thanks for the info on the engine.
How much would you want for the heads and lower end?
Is the lower end in pretty good shape?
Sorry for all the questions.
Thanks,
D Rainer
SCYALTR
12-23-2003, 05:33 PM
Hello Mark,
How much do you want for the heads?
Thanks,
D Rainer
Jim Demmitt Jr
12-23-2003, 11:56 PM
I got my old set of 13.088et heads.
$1000.00 compleate with stainless high flow valves comp springs plus a stroker short block with Crankshaft specialist forged steel crankshaft special made got block crank rods pistions all for $ five thousand dallars
Can we say 11's for you Jim Demmitt Sr. stroker motor all ready to install just takes big bucks or buy the Silver Bullet all extra parts for $ 15,000 turn key deal
SCYALTR
12-27-2003, 01:13 AM
Hey Jim,
Hope you had a semi Happy Holiday.
Man, if I had the scratch to buy that setup believe me I would he he.
I would love to Cruz Big Blue with that kind of power.
As usual I was not expecting to make a major repair like this.
I will have to get what I can with the cash I have.
Thanks,
D Rainer
Jim Demmitt Jr
01-03-2004, 04:26 AM
"It cost a BUNCH" :(
What I have invested in the project "Silver Bullet" is so much but it was worth all the efforts going into the 11's ;)
Good luck with the rebuild let us know what you come up with?
Hope to see "Big Blue" next summer
SCYALTR
01-03-2004, 04:44 AM
Hey Man,
How long have you had the Mustang (Fastback)?
Does it have the 289?
How much did you want for it?
Thanks,
D Rainer
Jim Demmitt Jr
01-03-2004, 04:54 AM
Its a 68 fastback :)
Has 289ci top loader 4 speed tork thrust wheels like Steve Mcweens Bullet Car. brand new BFG's all the way around its the one we took to Bodega Bay Cruise.
It needs a good home needs paint and some interior work its all black leather interior fold down back seat bench type front seat with fold down center arm rest.
Special licence plates (Bullet 68) my dad was going to make it just like the car in the movie. want to get at least $7000 for it also have 68 glass shelby hood and front valance air dam
vBulletin® v3.7.4, Copyright ©2000-2008, Jelsoft Enterprises Ltd.