wipers dont work

Things to ck

The wiper system consists of the multi-function switch (turn signal stick), a govenor (behind driver left knee panel) and the wiper system (motor and intermittent control)

If your lights, turn signals and brights work chances are it's the wiper motor you need to replace.

The motor is comes out the top (in less you have the IC return out, then it's easy from the bottom)

Pull the wiper blade assemblies (careful to loose the index stop on each that is a little black sqare piece), unscrew the cowel cover and remove, pull bolt on wiper blade drive, pull 3 or 4 bolts for motor mount and disconnect the wire harness. You can test the motor by jumping 12 volts from battery ( I don't remember which pin's)

My motor went out slowly and the wiper blades would hang and I had to reset them manually. New motor install was about 1 hour.
 
Back
Top