Touque on ARP`s?

scbird1

Registered User
Torque on ARP`s?

How tight sould they be be installed into the block without the head? and what is the torque to install heads like 30-45-60?
I did a search and turned up torque to yeald bolts but no arp`s
Thanks, Mark
 
Last edited:
I did on the inside of the thread. I spilled my bong and pressed the wrong button. Thanks tho
 
Finger tight in the block.

And I think the paper that comes with the studs says 65 or 70 ft-lbs with aluminum heads. So I did 30-50-70 ft-lbs when torqueing down the nuts.
 
BlackbirdSC said:
Finger tight in the block.

And I think the paper that comes with the studs says 65 or 70 ft-lbs with aluminum heads. So I did 30-50-70 ft-lbs when torqueing down the nuts.

Thats the same thing I did also.
 
Back
Top