bad grounds

cstemm

Registered User
I had to replace the motor mounts due to excessive shaking, the car ran before, then after changed it wouldn't run....guessing it is either bad ground somewhere or vacuum leak. Just wondering where the grounds go on the passenger and the driver side...thanks
 
There is a ground on each motor mount. The main ground from the battery is on the drivers side. Did you forget to hook one up?
 
i'm not quite sure, i'm just trying to rule out the obvious, and why the car isn't running when it ran before, any other ideas...i'm pretty sure my vac lines are wrong but would that keep it running altogether when it ran before...?..thanks
 
Back
Top