PDA

View Full Version : Rebuilding suggestions



SCfromBC
01-08-2004, 03:39 PM
I am about to pull my motor.Head gasket is blown.I am going to rip it right down and hot tank. Other than flowing the heads ,better cam ,freshening the bottom
end (rings ,checkin pistons,etc.) any suggestions on routes that I could or should go while I've got it down to the bare bones? Also any suggestions on places to look for cam profiles I will probably get Colt Cams in Langley to hook me up. I have heard pretty good things about them. If any of you guys are
local any recomendations on machine shops that you have been impressed with in the Vancouver area. I'm lookin at
a guy in Aldergrove who builds bracket engines and says he can do it all as well as pick me up at least 5 to 10 pounds of oil pressure in the process. All for what seems to be a good price. Thanks.

devlin
01-19-2004, 08:23 PM
you might try posting this message on www.sccowc.com we dont use this board, and there maybe people that can help you over there.