injector wires

scbird1

Registered User
What would happen if they are crossed? This 94 is driving me nuts. Someone had rebuilt the motor and the head gaskets blew just 2k later. They marked the wires and as I found out wrong because 123 are on the pass. side. I think 5-6 were switched also. I look at my other 94 and it looks like 1-2 are not right. It idles fine for a while then the vac drops from 20 to 17 and starts to miss but will correct itself after a min. I would think it maters alot but the swich between 5-6 did not make much differance. How can I tell for sure where each wire goes to?
 
I checked in my program on the wiring and here's what I found.
Here's the color that should be going to each injector.
INJ1: tan
INJ2: white
INJ3: brown/yellow
INJ4: brown/ light blue
INJ5: tan/black
INJ6: light green/orange
 
Back
Top