fastsc92
Registered User
Ok guys i finnally got the car back together after porting the heads, and getting a CM stage 1 cam. I ran into a few snags putting everything back together, but thats normal. I started her up, and it fired right away. I was happy about that, but its idling at around 1300rpm. I have a 75mm TB and the idle screw is all the way down, and the TPS voltage is about .92 volts. I messed around with the IAC screw, which will bring the idle down, but after goosing the throttle, it'll sputter before it gets back to idle. I adjusted it so it idles at 1000rpms, and doesn't sputter, but I'd like to go lower. Is there anything else i can do to get it to go lower, say around 800??? Thanks for the help in advance guys.