New starting problem

I started my car this morning to warm it up no problems, cut it off for about 30min. Now it will not start again, recently replace crank sensor,cam sensor and balancer (BHJ).
Turn key motor rotates tach bumps like normal, no upshift light while turning over but on before turning over with key on. Checked no spark and Fuel pressure good. Code is 111 system passed. Any ideas?

sounds like an ignition module as a first quick guess.

Check your crank sensor harness not the sensor itself.
I was getting fuel and compression but no spark but my
car wasent throwing an upshift light when cranking.
Crank Sensor harness by the DIS modual was the problem.
Just a thought.

Thanks it was the ign. module.