Intercooler Tube Support?

i took out that pain in the arse mount for the top intercooler tube that connects to the power steering pump.....i hate that thing. Am i gunna be ok with the SC-Top and top-tube bolted to the top of the supercharger and intercooler?

doesnt seem like a big deal to me, but what do you guys think?

I left my mount out also, has not caused any problems so far.

Shouldn't be a problem. In fact, if you're running a raised blower top you don't have a choice. It raises the tube above the hole for the bolt.

sounds good to me, thanks for the input guys.

I removed that stud on the power steering frame when I installed a raised top on my '94. As long as the lower tube is still bolted, it should be ok. I've had no problems with mine.
However, when I did the same install on my '93 some years earlier, I just cut the lug on the upper IC pipe with a hacksaw, so it was open ended (fork or "u" shaped) and then just bolted it back on using a larger washer. Either way you shouldn't have any problems.