Rich Thomson
Registered User
Anyone ever see different heights between the stock 3.8L lifters and the Ford Motorsport lifters. I found the stock lifters in my Ford Remaned engine to be .020" taller than the Ford Motorsport ones. I am talking about the height at zero lash on the lifter.
Ford reman engines suck!
Wait until I finish my How-To article on the cam and rocker install. The pic below is of the lifter and cam lobe after 10k miles. The preload was all over the place when I was checking each lifter for proper preload. The head alone was milled .035" and had been repaired!
Ford reman engines suck!
Wait until I finish my How-To article on the cam and rocker install. The pic below is of the lifter and cam lobe after 10k miles. The preload was all over the place when I was checking each lifter for proper preload. The head alone was milled .035" and had been repaired!
Last edited: