changing trans fluid

you will need like a pump kinda thing...I made one out of 2 pieces of clear hose, about 1 inch in diameter, and a hand pump from...i think it was one of those industrial sized industrial strength hand cleaners. it was PITA to pump almost 4 quarts of fluid in the tranny, but it was cheaper than taking it to a shop. my arms were tired from pumping, but my wallet was safe:D
 
I use a funnel and a long hose, sort of like filling an AOD.
I put the funnel with hose attached in the engine bay near the brake master, feed the hose down past the steering column, and into the trans. You need 2 people, 1 to pour and 1 to hold the hose in place and say when to stop pouring. Good luck
 
my 2 cents

Personally what I would do, would be to take your shifter housing off inside the car, and fill it from in there, im pretty sure some guys on here have said to take the fill plug out and when it comes out the plug its full, but im sure theres an exact amount somewere on the board, hope I can help
 
Back
Top