SlinginBeauty
Registered User
Im in the process of putting in a bhj harmonic balancer and my ud pully set. I have them all off except for the alternator pully. As from what i know that you need an impact wrench to change that pully and i dont have one so i was recomended to take the alternator out and take it to a local shop where they will change the pully for me. But my problem is getting the alternator out. It seems that after i undid all the bolts holding it in place, the bracket for the trensioner pully is in the way with the ic tube on the other side not giving it enough room to get out. What can i do? The bracket looks like it aint movin, and the ic tube is in place unless i take off the top of the sc and i dont have a spanner nut wrench to do so to move it out of the way. What can i do to pull it out? any ideas? i would have imagined this to be the easy part of my installation but i cant figure it out. All help is appreciated. Thanks. Zach