PDA

View Full Version : Progress



kenewagner
02-28-2004, 02:40 PM
I am finally starting to assemble my FMIC. I am still waiting for several pipes & the top to come back from the plating shop. I added a stainless steel cover to the top of the radiator support this morning. I was happy how it turned out. I thought I would post a couple of pictures showing my progress. I still have some buffing to do on the IC itself

kenewagner
02-28-2004, 02:41 PM
A side shot of the stainless steel cover

MIKE 38sc
02-28-2004, 03:00 PM
Looks nice! I'm looking into mounting my IC in that area but I'm going to have to modify the IC even more to do it. But I think I got it figure out.;)

kenewagner
02-28-2004, 03:13 PM
There room for a fan if I chose. I modified the bumper and added directional vanes to direct air to the IC. Had to move the horn, temperature sensor, washer resevor. Had 3 diffrent brackets on the IC itself. It would be easier if I got it right the first time After all these changes I will have to spend a lot of time making the rest of the engine and engine compartment look good.

Bill McNeil
02-28-2004, 03:18 PM
That is EXACTLY the set-up I had planned before the MP FMIC group purchase took place, I and decided I'd go that route instead.

Do you have any pictures of the rest of the plumbing?

That is a great set-up. Very nicely done!

kenewagner
02-28-2004, 04:06 PM
Here is a picture of the tubing tacked together prior to tig welding. I used mandrel bent tubing pieced together, welded and hand filed. The tubes came out perfect. In the picture I had not extended the alum griffen radiator yet. I like the look of the tubes being side by side.

kenewagner
02-28-2004, 04:13 PM
Here is a picture of the top just before I sent it out to have it plated. I raised it 1.5 inches.

Tbird1712
02-28-2004, 04:17 PM
That is going to be a nice setup.. looking good!!

V6Sprout
02-28-2004, 04:32 PM
SWEET! I have been trying to figure out the best way to mount mine in the engine bay of my mustang, I am doing the same thing, 2 SC IC's welded to gether with custom endtanks, Nice setup bro!

kenewagner
02-28-2004, 05:02 PM
Thanks all. I will post the finished project when it is done. A lot of the ideas for this project I got from other SC owners on this club site.

Bill McNeil
02-28-2004, 05:45 PM
EXCELLENT!

I have a lot of respect for people who can fabricate their own parts and actually make them work on the car.

Way to go!

Billabong089
02-28-2004, 06:02 PM
That SC top is amazing work

XxSlowpokexX
02-29-2004, 04:44 PM
Very nice KEN!

Randy N Connie
02-29-2004, 08:09 PM
NICE JOB.Its great to see when people fab there own parts.

RANDY

kenewagner
02-29-2004, 08:33 PM
12 years ago before the SC bug bit me I started a car project. It was a chevy monza. I had build a 400 small block and had tubed the rear end. I had narrowed a 12 bolt rear end. Had to sell it when I got a divorce. This Sc is the first car since than for me to tackle and this club site has given me tons of information to help me make good choices in modifacations. I continue to have fun changing and personalizing this car. And I appriciate all you guys out there and your help:D

David Neibert
02-29-2004, 10:23 PM
Ken,

Nice very job, that looks great.

David