do these headers fit?

Just so you know, those MAC headers aren't so easy to install. Maybe they made some minor changes to their design, or I just got a bad pair, but the drivers side wasn't even CLOSE to fitting. After denting a huge dent in the collector it was still tight against the steering shaft. So I had to make some bigger changes. First I cut a groove along the underside of the primaries, about half way through, right by the flanges. Then I heated it up and bent it down so it runs closer to the block. (Essentially I rotated the flanges slightly relative to the rest of the header). Finally it had to be all welded back together. I also had to make a jig to hold the flanges perfectly flat through all this work. BTW I'd be happy to sell that jig if anyone wants it, it's a flat, thick piece of metal with bolt holes in the right places...
 
Back
Top