Miss Firing??

SweetSc

Registered User
I've had a problem when the engine is cold that it will hesitate really bad until it warms up. Once the engine warms up (3mins or so) it runs ok. I've changed the plugs and reseated the wires with no luck.

Should I try replacing the plug wires? I'm running 4 year old Magnacors.

Any other suggestions?


Chris
 
"Vacuum leaks"???

Depending on what you use to seal the IC tube connections, that could be a cause. Or, it could be a vacuum line fitting. It sounds like there is a "gap" at a connection that "closes" due to the expanding metal when the engine reaches temp. Just a thought...
 
Could be your ignition coil. It may not have enough fire while its cold but runs fine when it gets the right mixture as it warms up.
 
Back
Top