Torque specs please ASAP!!!

tbirdcrazy

Registered User
I'm putting in 3.27 gears in as i type this i just need to know the torque specs for the ring gear bolts, pinion bolt, and the cover bolts,

thanks for the help:confused:
 
Did you check pinion depth, backlash, and get a new crush sleeve.

Ring gear retaining bolts: 71-84 ft-lbs

Pinion nut minimum torque to obtain correct pinion bearing load is 140 ft-lbs.

For the pinion bearing preload: 8-14 inch-lbs preload with old bearings
and 16-29 in-lbs preload with new bearings.

Bearing caps 70-85 ft-lbs

4-oz friction modifier
1.5 liter gear oil.
 
Back
Top