in middle of changing aod out, shift lever ?

pdennis93

Registered User
we cannot get the gear shifter arm off the old transmission to move it to the other one... how do we go about doing this?
 
There is a dower pin that locks it in. Should be made of plastic. Try a pic tool and some needlenose pliers. Best of luck, it will be pain.
 
The TV arm comes off with a nut.

You have to remove the pan to pull the shift lever itself. Like Pearl95 said, there is a drift pin that must be pulled out with needle nosepliers. The pin in mine was metal though.There is also a (21mm IIRC) nut on the valve body end of the shift arm shaft for the arm to slide out.
 
Back
Top