View Full Version : mark viii parts on a 95sc

03-15-2004, 03:50 PM
im sure its been talked about, but i did a search and couldnt find any info on 94/95 SC's. i was wondering what parts from a Mark VIII would be an upgrade on my 95 auto any help would be great thanks

03-16-2004, 02:50 AM
i was also wondering if i can use parts how much if any diiferance would i see in the car from how it runs and handles now

03-16-2004, 09:31 AM
I am a newbie so my opinion shouldn't count for much but...
Since the lighter aluminum differential is "sprung" weight (attached to the frame) then it should not affect handling to any degree. You save some weight going from iron to aluminum but the weight savings is in the rear. Most cars are front heavy so weight savings in the rear is a +/- thing.

The other item is I believe the inner CV joint is a little stronger. I don't think you will notice this until/unless you break the joint. If it is strength that you want I believe the 1.5" Raxles are the way to go.

03-16-2004, 10:40 AM
With the exception of the spring set up, the suspension is the same style but its made of aluminum. The brakes are bigger in the front and Im not sure about the halfshafts.


03-16-2004, 12:32 PM
alot of people use the front brakes and rotors as an upgrade over stock.