superc0upe
Registered User
I did some searching in the forums but could not find the answer. I just found out that my crank pulley is shaking very hard. Upon inspection, I found that I am missing 2 of the 4 bolts from the crank pulley. I need to know the exact size of the bolts and what kind to get? (car is at a friend's house right now)
Also since I only have 2 bolts on the crank pulley, should I take them both out and put all 4 bolts back together at the same time using a cross pattern or can I just screw in the 2 bolts?
My car starts with no problem other than a loud sound from the belt, meaning that my balancer should still be ok. Should I go on ahead and replace the main bolt in the middle of the pulley? (I still have my stock one in there)
Thanks in advance and any help is greatly appreciated.
Also since I only have 2 bolts on the crank pulley, should I take them both out and put all 4 bolts back together at the same time using a cross pattern or can I just screw in the 2 bolts?
My car starts with no problem other than a loud sound from the belt, meaning that my balancer should still be ok. Should I go on ahead and replace the main bolt in the middle of the pulley? (I still have my stock one in there)
Thanks in advance and any help is greatly appreciated.