MMX Driveshaft OFFICIAL SIGN-UP

[Thomas A]

MMX Driveshafts from Reinhart Automotive

http://web.iwebcenters.com/reinhartautomotive/images/metalmatrixdriveshaft.jpg
- Drive shafts are balanced at a minimum of 6000 RPM
- Drive shafts are balanced to under .25 oz - inches
- Drive shaft run outs are to be with in .015
- U Joint clearances are to be .002 0r less
- Balance weights are fused welded to shaft tube
- Drive shafts are rebalanced after welding
- Drive shafts are manufactured with Dana Spicer parts

PRICE: $430 FREE SHIPPING

We need 20 orders to recieve this pricing. You will need to contact Reinhart Automotive at 904-276-5003 and place your order. Just mention that you are part of the Group Purchase. Once atleast 20 orders have been placed, they will be shipped out. So the sooner we can all get our orders in, the sooner we'll have our driveshafts. Please also post here only if you have or plan for sure to order one, so we can keep track of how it's going. Thanks!!


ALL SPOTS HAVE BEEN FILLED. DRIVESHAFTS ARE BEING SHIPPED OUT AND YOU SHOULD RECIEVE THEM SHORTLY. THANKS FOR EVERYONE'S SUPPORT ON THIS!!

[boatmangc]

Just ordered my MMX from Dennis! Only 19 more to go and he'll ship it.
Gary

[SlinginBeauty]

I think i did read that they are for 4Wr70's and not AOD's. Am i right? thanks for input. Zach

[Thomas A]

Yeah, these are for 4R70W's only. I'd get ahold of FSR or Inland Empire if you are looking for a nice driveshaft for your AOD.

Thomas

[BT Motorsports]

George Clark stated "$300 out the door with new super duty U joints and flange and yoke."

http://www.sccoa.com/forums/showthread.php?s=&threadid=29754&highlight=aluminum+driveshaft

Paul

[SlinginBeauty]

URL Not found???

[Rich Thomson]

Yeah, these are for 4R70W's only. I'd get ahold of FSR or Inland Empire if you are looking for a nice driveshaft for your AOD.

Thomas

AOD, T5, and M5R2 all share the same 28 spline yoke. Easy swap to the new driveshaft. C/L Yoke to C/L yoke.

94-97 3.8L 4R70W 57" driveshaft (4R70W overall length 32")
89-95 3.8L M5R2 53.80" driveshaft (M5R2 overall length 35")
89-93 3.8L AOD 57.80" driveshaft (AOD overall length 31")
94-97 4.6L 4R70W 58.20" driveshaft (4R70W overall length 32")
93-98 Mark VIII 4R70W 58.20" driveshaft (4R70W overall length 32")
94-04 Crown Vic 4R70W 55.50" driveshaft (4R70W overall length 32")


Rich

[Thomas A]

Okay, cool. That is good info. These come with yokes and u-joints, so I guess I should rephrase that to 4R70W will be the only direct bolt in. Thanks!

Thomas

[Rich Thomson]

MMX Driveshafts from Reinhart Automotive


- Drive shafts are balanced at a minimum of 6000 RPM
- Drive shafts are balanced to under .25 oz - inches
- Drive shaft run outs are to be with in .015
- U Joint clearances are to be .002 0r less
- Balance weights are fused welded to shaft tube
- Drive shafts are rebalanced after welding
- Drive shafts are manufactured with Dana Spicer parts

PRICE: $430 FREE SHIPPING

We need 20 orders to recieve this pricing. You will need to contact Reinhart Automotive at 904-276-5003 and place your order. Just mention that you are part of the Group Purchase. Once atleast 20 orders have been placed, they will be shipped out. So the sooner we can all get our orders in, the sooner we'll have our driveshafts. Please also post here only if you have or plan for sure to order one, so we can keep track of how it's going. Thanks!!

And how are these driveshafts going to fit any Year SC????

The AOD driveshaft comes close at 57.80" but the 58.20" length could cause it to bottom against the tailhousing? It is the wrong length. The AOD still uses a different yoke.


I just don't want to see people purchasing the wrong part.

Rich

[Thomas A]

They should fit any '94-'95 SC with the 4R70W tranny.

Thomas

[Rich Thomson]

The driveshaft of 58.20" is too long. I had a Mark VIII driveshaft in a 95 SC and it busted the trans tailshaft. Not enough yoke clearance. Yes the drive shaft will fit but the clearance is wrong. You risk damaging the tailshaft is my point. I was unable to get the C/L to C/L measurement for the MMX driveshaft. Maybe someone here can verify the MMX length who already has one.

Rich

[BT Motorsports]

I just corrected the broken link I posted above regarding reasonably priced aluminum driveshafts which should take care of anyone who cannot use the MMX shaft Thomas is working on.

Paul

[Rodeo Joe]

Has anyone else bought one of these Paul? Don't want to hijack this thread, sorry!

Joe

[BT Motorsports]

I know a few people have purchased them, cant point anyone specific out though. If it means anything, I intend to get one in a few months when I order a new transmission for my 93.

Paul