View Full Version : codefusion

04-19-2004, 05:37 PM
among other codes, i got a 632 - doesn't show in my book??? I found online one place that says this, "632 (R) E4OD - Transmission Control Switch (TCS) should be cycled once between engine ID and Goose test " found that here...http://dalidesign.com/hbook/3digit.html

I assume tcs is my gear shift lever? Anyway I tried at different times in the keor test but every time seemed to kick it out of test mode and no codes at all came out. I know the single pulse is the goose test, I had that work, but what is engine ID? Anyway, somebody must know how to do this correctly.

Thanks, Jay

04-19-2004, 06:12 PM
I assume tcs is my gear shift lever?

They are talking about the "OD ON/OFF" Switch

Code "632" is a KOER test ......so the engine must be running.

Basically you have to start the engine, and then switch the reader to "test". It should blink/sound 3 times indicating that you have a 6 cylinder car. After you see this then you must turn the overdrive off and then on again. Thats it.

Hope this helps.

04-19-2004, 06:29 PM
oh thanks. Well that's easy and not, my od lockout button hasn't worked in a long time. any idea why that might be?