Well, after visiting 2 muffler shops about installing my Magnaflow 2.5 dual in, 3 inch out, I was told:
1) You can't run 2.25 inch pipes off of the stock manifolds
2) You can't run 3 inch pipe out to the rear of the car
I was planning to run 2.25 off the manifolds, and somewhere along the way, increase to 2.5. Temporarily, I was going to run straight (not technically, but...) 3 inch out the back, and remove but save the stock mufflers, maybe putting them back on in the future (after sound check and Dyno )
Can anybody suggest anything? I have a car with a 10% that im DYING to floor! thanks
1) You can't run 2.25 inch pipes off of the stock manifolds
2) You can't run 3 inch pipe out to the rear of the car
I was planning to run 2.25 off the manifolds, and somewhere along the way, increase to 2.5. Temporarily, I was going to run straight (not technically, but...) 3 inch out the back, and remove but save the stock mufflers, maybe putting them back on in the future (after sound check and Dyno )
Can anybody suggest anything? I have a car with a 10% that im DYING to floor! thanks