how much boost with 10%?

turboken

Registered User
I have a 10% pully, K&N cone on the MAF, 2.5 inch exhaust with magnaflow resonator and 3 inch single pipe with no mufflers. I'm pulling about as much boost as without the 10% and exhaust. I floored it from a stop, and it didn't spin either. Does it need a little back pressure? I have a medical restriction on my license, and I can't remember/can't tell if the car is faster now or the same as 3 months ago. It used to spin a little on the street. Anyone with similar mods, please tell me what boost you pull. thanks

ken
 
i just did a WOT check. It spun (squeaked) a little, and pulled about 9 PSI up to about 5000 where it was barely over 10 PSI. It does feel faster at the top end tho, I ran it up to about 115. WAY TOO F'ING LOUD THO!!!!!!
 
Our 93 gets around 13-14 with a good exhaust and 10% pully and the 95 pegs it at 15 with a good exhaust and a 3% pully. I say 3% cause its the stock pully off the 93.
 
Back
Top