sc on a na 3.8

dresid

Registered User
i was wondering if the sc parts will fit a na 3.8. and will the distributor be in the way.i know that the na 3.8 has weaker internals, but i plan on upgrading those later when a rebuild is necessary. and will the sc heads fit the na motor.
thanks,
dresid
 
SweetSc said:
That also doesnt mention you will need....

Stronger Tranny
SC ov V8 Shocks/springs
8.8 Rearend/Halfshalfs
Bigger Radiator

among other things....


Chris

I thought a stock sc came with a 7.5" rear end?


The sc springs are stiffer then the v8 springs.
 
already upgraded

i have already upgraded radiator, 8.8 mark viii center section and supercoupe halfshafts. the springs are the same spring rate it will just set about a .5 inch lower in front and the shock / struts are not a factor v8 and v6 had the same design shock/strut dampnening was the same save for the sc which you obviously know had adjustable.
 
Back
Top