EEC vs. crank sensor test.

Slysc

Registered User
Is there an easy way to diagnose if a problem is EEC vs. crank sensor?'
I'm getting no pulse from my fuel injectors. That's usually the test for a fried EEC, yet it seems like it would do that if the crank sensor was bad also.
 
If there is no signal from the crank sensor you will see the upshift light on your dash stay lit during cranking. :eek:
 
dan...

Did you try to change plugs or wires, just to make sure that isn't your problem? I had that miss a few weeks ago, and it turned out to be one of the new plugs I put in was bad. This is after replacing DIS, Cam Sensor, and crank sensor. Other times I had that problem, it was the DIS module.

Mark
 
Back
Top