caliper help

I can't recall exact size, but I believe it's a 45 or 50. Also don't know why, but the upper caliber bolt is different than lower on the front's. You need "star" socket on one and the internal "star' socket on the other. Are you taking off whole caliper or just moving out of way for brake job?
 
You don't have to do that; you can just unbolt the caliper frames (2 x 15mm), take the whole brake assembly off the steering nuckle (you need to do this anyway if you're pullin the rotors). The caliper section will then just slide off those pins where the difficult Torx bolts are. Just make sure you re-lube the pins with brake/silicone grease before reassembly.
 
Back
Top