PDA

View Full Version : A/C Delete Belt Size Help



lx2sc
06-14-2004, 12:26 PM
I have searched but can never find the belt size for stock pulleys and just rerouting the belt I need this part number as soon as possible all and any help is greatly appreciated Thanks Justin

Randy N Connie
06-14-2004, 03:31 PM
Take your stock belt and make a straight line on it with a pencil.
Then wrap your belt around the way tou what it on the pulleys.
tuck the exces belt down.Then run the belt over the mark,and make
a mark that lines up with the first mark.Then take off and measure.

To get some adjustment.You can use a round file to make the alternator bolt
hole bigger.

You will need to remove the alternator bolt to get the new belt on.

I think my belt is 51 inches,but I have under drive pulleys so mine would be
different.

Randy

lx2sc
06-14-2004, 03:57 PM
Take your stock belt and make a straight line on it with a pencil.
Then wrap your belt around the way tou what it on the pulleys.
tuck the exces belt down.Then run the belt over the mark,and make
a mark that lines up with the first mark.Then take off and measure.

To get some adjustment.You can use a round file to make the alternator bolt
hole bigger.

You will need to remove the alternator bolt to get the new belt on.

I think my belt is 51 inches,but I have under drive pulleys so mine would be
different.

Randy

Thanks for the reply Ill try it but if anyone has the exact part number that would be great also Thanks Justin