How are ya'll fixing the window motors?

sizemoremk

Registered User
I've used some bolt fragments (via dremel) to replace that plastic cam deal, can the plastic cams still be had from ford or what?

I'm doing a second SC, and am thinking abut just JB welding the little gaps...
 
Supposedly the "Help" section at the parts stores now has a kit with these parts. You can also take a trip to the hardware store and sculpt some from any hard plastic stock such as PVC or cut up a big nylon bolt. Agree with george though, I'd try to avoid using metal.. Ford must have had a good reason other than planned life for using the plastic. :)
 
Good writeup. However, they probably won't hold up as long due to the hollow core. Next time I'm at the hardware store, I'll see if I can find some big nylon bolts. Same concept, but with a solid core.

I wonder why Ford didn't use hard rubber for the pieces. Maybe I'll try it for myself.
 
Last edited:
Back
Top