PDA

View Full Version : Front Sway Bar part Numbers please.



darkstar_one
08-14-2004, 02:21 PM
ok, why the hell is my sway bar loose? the passenger side if u push it up it will make a CLUNK CLUNK sound, do i tighten it or just get the new end links and new mounts?

darkstar_one
08-14-2004, 09:21 PM
hello? anyone?

J.D.
08-15-2004, 12:14 AM
You edited your post while I was answering it :)
I would replace the sway bar endlinks (and the upper control arms if the balljoints are loose). I hear a similar crunching sound from my car even though the suspension is tight. The only thing that looks wrong are the endlink boots which are torn.
Sway bar endlink: Moog K8633, TRW 18116, AC DELCO 45G0011
I don't know what is the diameter of the stock sway/stabilizer bar.

darkstar_one
08-15-2004, 12:21 AM
also, my 4 front sub fram torx bolts were loose by atleast 180 degrees, any idea how to tighten up the remaining 4 rear bolts?