View Full Version : Cam seonsor PIC!

08-23-2004, 11:07 PM
I have read a post on how to adjust a cam sensor by Fred. However there is a missing picture that is unhosted now. Apparently it will help me in my adjustment but I need the picture! If anyone has saved the image and would like to post it, please do so so I can get my beast back on the road!


08-24-2004, 12:19 AM
Set the cylinder 1 to 26* After Top Dead Center of the compression stroke. The front cover arrow should be pointing at the groove in the balancer. If you are not on the compression stroke, you will have a hard time starting. Just rotate the engine a full rotation.

You can see in the picture where the half moon of the cam syncro needs to be prior to bolting down the syncro assembly.