PDA

View Full Version : Vac Leak



Billabong089
08-31-2004, 01:55 PM
Actually got two problems, first I took off the upper and lower IC tubes, but trying to put them back on was a hassle, the lower tube I cant get a wrench on one of those bolts, so didn't tighten it that much, I used Black RTV gasket sealer - high temp and I def have a vac leak, Vac is fine around 20 but boost goes to 7lbs and quits and you can tell its leaking.


Second I took my alt off and sometimes when I go to start the car everything just dies, 30secs later everything comes back and it works fine... it did it like 5 times already...little confused.

stocker 89
09-05-2004, 10:11 PM
turning the stud after you undo it and get the nut down further.


AAAAA about three mohths ago the wire on my alternator burned up and I don't know why. So I had to replace the whole harness from the (starter ignition relay) you know the thing on the sidewall that the positive from the battery connects to. Reads like a bad connection.