Parting out 2 1989 SC's

[backnblk]

Both cars are black with maroon interiors. One is leather, the other cloth. The drivers seat is bad in both cars. The rest of the interior is good on both. They have blown their gaskets and just can't fix both, so the have to go.

[radiorick]

Do you have a cold air intake or a spoiler for sale. If yes, how much? thanks Rick

[backnblk]

No,sir. No cold air intake or spoiler. Sorry

[mxw]

I’m using a totaled 89 SC with 5-speed manual transmission as a donor car to upgrade a spitfire power train. I need a wiring harness and possibly a computer. Do you have these?

[derekhay316]

Both cars are black with maroon interiors. One is leather, the other cloth. The drivers seat is bad in both cars. The rest of the interior is good on both. They have blown their gaskets and just can't fix both, so the have to go.

Looking for a rear hub. Shoot me a price derekhay@shaw.ca

[backnblk]

I’m using a totaled 89 SC with 5-speed manual transmission as a donor car to upgrade a spitfire power train. I need a wiring harness and possibly a computer. Do you have these?
Yes, I have both. The car qas running till the HG blew.

[backnblk]

Looking for a rear hub. Shoot me a price derekhay@shaw.ca
Sorry, no pictures right now, but I do have the rear hubs

[mxw]

Yes, I have both. The car qas running till the HG blew.

So you have a computer and harness from a manual transmision car? how much do you want for them. send me a price mxwmxw@charter.net

thanks

[smf]

Need complete IRS assembly (diff, axles (for joints) spindles, all spindle bolts, hubs, brakes).

Where are you located?
Axle ratio?
Price?

[metalman]

How are the front bumpers? Any cracks in them. I need one. How much?

Thanks,
Metalman

PM me please

[89cougar]

need engine oil cooler if available

thanks,

[1989Silvercoupe]

Do you have a motor and if so how much

[Prick_Racing]

i need the sc skin and the front bumper if you got it email me or call me kibox90@hotmail.com 602 740 5528

[cato]

how bout the boost gauge hose, the one that runs from the sc inlet to the gauge, NOT the small one in the dash.

[rbart23]

I'll take the interior driver side door panel if you still have a maroon one. my zip code is 02359. Just tell me how much. And do you have any rear bumper covers in good condition? Thanks
Rick

[bman1985]

Need an ABS accumulator for 92 Sc have any?

[90blkbrd]

I need Seat Switch Panels Valence. That is the plasic piece between the seat and the floor where all off the seat switches are for a SC.

This thread has pictures of a non SC seat panel

http://www.sccoa.com/forums/showthread.php?t=51209


I also need the light switch. Not the electrical part just the part that you pull on.

How much shipped to 50317?

[S/C Rob]

I need 1 brake line Email me at yourman95@exctie.com
I will tell you what one it is...
Thanx For Your Time
Rob

[PricelessXR7]

I need a harmonic balancer if you have one. Post or e-mail me with a price, please.

[pressure]

I need Clutch peddle/bracketand brake peddle to convert auto to stick. Do you have these and how much? Thanks!

[robert_s]

I need a harmonic balancer for an 89 SC auto trans. Part # E9SZ6B321C.
Please email me if you have one.

RMS

[robert_s]

I need a harmonic balancer for my 89 SC for an engine with a cast iron crank. The Ford part # is: E9SZ6B321C. Please contact me should you have one. I'm outside Akron, OH

RMS

[ColoSC]

Hi,
I need a 5 SP shift knob. If you have a good one, emil me graffisd@aol.com.
Thanks,
Dex

[bluebird]

do you still have a front bumper cover? pm or email me at brains06@hotmail.com

[Blackcoup89]

Hey bro where are you located im interested in one entire car cuz im willing to restore one cu i fell in love with those cars. so if you can hook me up with one ill be glad to take it off your hands.
Thanks,
Oscar

[94scoupe]

Ineed the wring harness for the five speed. PM me if you still have and want to sell. Just shoot me a price. I can use PayPay

[SILVERBIRD]

Howdy.....I need an intercooler....got one? How much?
Mike

[PEX68]

Looking for a complete 8.8 IRS set up off a 89-95 Thunderbird SC with posi. I would need center section, half-shafts, spindles, rotors, calipers with parking brake cables intact, caliper brackets, and all related hardware (bolts for pumpkin, spindles, cal brackets ect.) Need parts to be in good condition, don't want something I need to rebuild. Please let me know if you have this, what the ratio(s) available are, and how much. I live in NJ, let me know where your located. Anyone elese with this???, email me!
Thanks, Chris.

[Jake89]

I was just wondering if you have a power steering pulley for an 89 sc. Thanks

[Darth Menace]

need a 70mm mass air...mass air and electronics on the top
thanks

[shadysheldon]

My 90 t-bird has a leak in the sun roof. Looking for a gasket. let me know.

Sheldon

[rhodes588]

Do you still have the VMM and the driverside corner tailight w/ housing.

[dlbt]

do you have the brake and clutch pedle assemblieBoth cars are black with maroon interiors. One is leather, the other cloth. The drivers seat is bad in both cars. The rest of the interior is good on both. They have blown their gaskets and just can't fix both, so the have to go.

[jpmcdonald]

Both cars are black with maroon interiors. One is leather, the other cloth. The drivers seat is bad in both cars. The rest of the interior is good on both. They have blown their gaskets and just can't fix both, so the have to go.
Black'n, how about a rear bumper cover in black in decent condition ? Where are you located Am wondering about shipping costs. Thanks J.P.

[jpmcdonald]

Both cars are black with maroon interiors. One is leather, the other cloth. The drivers seat is bad in both cars. The rest of the interior is good on both. They have blown their gaskets and just can't fix both, so the have to go.
I could use a black rear bumper cover for 89-91 'Bird, black preferred. what shape is your in ? Also,
I could use a whole set of the metal bracketry used to (and normally attached to the plastic bumper cover) mount the rear bumper cover of a 89-93 Tbird SC. I happened to acquire a bumper cover years ago, which came without the mt. brackets. maybe someone with a badly damaged bumper cover could remove/save the brackets. Thanks J.P.

[Zanary]

I need a clutch pedal assembly and the ABS accumulator ball off the master cylinder if they're available...give me prices....

[Scott Long]

you realize this thread was started in September of 2004 right?