Ported Heads still for sale...

fastsc92

Registered User
Still have a set of ported heads for sale. Once again, heads are gasket matched on the intake side, both short turn radius are removed, and the bowls are opened up. Chambers are polished and the valves are unshrouded. Heads use stock valves and come assembled with new felpro valve seals, and intake gasket set. Looking to get $400 plus shipping but will consider other offers. Here are a bunch of before and after pics.
433758_13_full.jpg

433758_14_full.jpg

433758_44_full.jpg

433758_45_full.jpg

433758_46_full.jpg
433758_78_full.jpg
433758_79_full.jpg
433758_17_full.jpg
433758_26_full.jpg
433758_30_full.jpg
433758_32_full.jpg
433758_34_full.jpg
433758_33_full.jpg
433758_73_full.jpg
433758_74_full.jpg
433758_75_full.jpg
433758_76_full.jpg
433758_77_full.jpg
 
well last year i was running 14.2 in the quarter now i've run 13.019. Not sure if its just the heads or not. I also have a cam and did a lot of custom tuning. The car is def. capable of a 12.7.
 
heads still for sale

like to get with you on the heads if you still have them give a numer and will give you a call, would like to have as soon as posable
 
can you give me a written guarantee that these have NO cracks.....cuz im going to pressure test them before i put in larger valves

a friend on mine bought a set of used heads and they ended up being cracked (what a bummer)


last questions do you have any flow numbers???

todd
 
Last edited:
cheeriosluvr said:
can you give me a written guarantee that these have NO cracks.....cuz im going to pressure test them before i put in larger valves

a friend on mine bought a set of used heads and they ended up being cracked (what a bummer)


last questions do you have any flow numbers???

todd

The heads were on my car before i took them off to swap to the heads that i ported before these. They seemed fine, no leaks and the car never blew a headgasket. I can not garrentee anything as i dont have the ability to pressure test anything. If you're going to add larger valves, you should be changing the valve seats as well to accept larger valves. I dont have flow numbers, as I dont have that ability either.
If anyone is still interested please just shoot my an email or PM. I'm heading home from college this weekend to package up the heads to get them ready to be shipped. I'll prob. place the heads on ebay if they are still available by the end of the weekend.
 
Back
Top