Need help on dash

ShawnSC1

Registered User
Ok I picked up this dash from a manual car. So I installed it in an aod, thinking everthing will hook up. I hooked up all the wiring harness, and then noticed one harness wasn't hooked up from the main ignition harness. I think it goes to the clutch switch. Is there anyway of bypassing this problem, because the car won't start.
 
You need to plug in a Clutch Triple Function Switch Jumper. Or short the two red/light blue wires together and the light green wire to the red/light green wire.
 
I hooked up the 2 red/light blue together. SO it started. Now the car has a hard time staying running, and the orange engine light is on. Also sounds like the cooloing fan is running all the time. The rmps have also jumped. Is this because the wiring is different in the in the 2 dashs. The car ran great before changing dashs.

]
J.D. said:
You need to plug in a Clutch Triple Function Switch Jumper. Or short the two red/light blue wires together and the light green wire to the red/light green wire.
 
Back
Top