PDA

View Full Version : 10% pulley



Wolfs_Rain
09-23-2004, 08:34 PM
Has anyone here ever had any problems running a 10% pulley on a 94/95 blower with opened up exhaust and stock exhaust manifolds? Also, would it be pointless to do this without a bigger intercooler?

scbird1
09-23-2004, 09:34 PM
I did. It just superheated the air going in and caused it to miss at wot. I used a 89-93 stock pully. It worked perfect. If you have a better IC you might get away with useing it. Cold the car ran like a raped ape but soon after it was actualy running slower.

Wolfs_Rain
09-24-2004, 03:18 PM
Thanks, thats what I wanted to know

cowtown
09-24-2004, 05:21 PM
What's the diff between the stock 94/95 pulley and the earlier ones? Is the 94/95 bigger?

JOE91SC
09-24-2004, 06:15 PM
What's the diff between the stock 94/95 pulley and the earlier ones? Is the 94/95 bigger?

I'm not 100% sure about the stock pulleys.. but I think the 94/95 should be bigger to slow it down.. due to the more efficient improvement in the design. Cuz the 10% od pulley is actually 15% in the 94/95.

T-bird4vr
09-25-2004, 01:30 PM
thats right.