Need a little brake help

superbird92

Registered User
I have a 91 sc with the mark II brake system. I had the take the whole brake assembly out to put on a new pump motor. Now i'm not for sure what i am to do. I have tried to bleed the brakes but it's not helping. I have read alot of posts that say i need a tool to get the air out of the abs part in the brake system. Am i correct in this or should i take it to a shop or what. If ya need any info let me know i'll be glad to give any info to ya.

Thanks
Josh
 
If yours is a 1991, then no special tool should be needed other than a catch can or a "One man bleeder kit" available at most parts stores. TBirdSCFan is correct with his description of bleeding on a Teves II Sytem.
Also the link below was VERY helpful in troubleshooting Teves II System...
http://www.35ththunderbirdregistry.org/Tips/ABS.htm
Give a hollar if you still can't get it working as I had a heck of time doing mine.. :)
 
Back
Top