Ported manifolds by FRIDAY NIGHT!

getblown

Registered User
I had a deal on some ported manifolds but it fell through and i really need/or would like to get these on the XR7 before the motor goes in cause its %100 easier with the motor out. I have money in hand waiting but its got to be close to eastern pa. I am willing to travel a little bit so let me know what you have

jOe
 
If you have access to a die grinder and air compressor you can do your own in a couple hours. won't be powder coated but they would be functional.
 
wezar said:
If you have access to a die grinder and air compressor you can do your own in a couple hours. won't be powder coated but they would be functional.

...explain...?
 
http://www.sccoa.com/forums/showthread.php?t=51435&highlight=ported+manifolds


Look for the pictures of the pair I did in this thread.

I just chucked em up in the vice and went to town with the die grinder using a set of cheap grinding stones I bought at Home Depot.

In the picture of the manifold with the EGR fitting you can see the grinder and whats left of the grinding stone I was using.

Do a search and you will find other pictures.

http://www.sccoa.com/forums/showthread.php?t=46442&highlight=manifolds+grinder

http://www.sccoa.com/forums/showthread.php?t=9032&highlight=manifolds+grinder
 
Last edited:
Back
Top