FMIC and silicone connectors

daivd z

Registered User
I have a custom IC that is 28 inches long end of endtank to end of endtank. 8 inches high and 3 deep. Never used it has 2.5 inch endtanks. Is supposed to flow 700 cfm with only .9 psi pressure drop. Also forsale is 5 silicone connectors that are blue with clamps and one 2.75 to 2.5 inch reducer. Looking to get 300 for the IC and 50 for the connectors and clamps.
 
need pics

daivd z said:
I have a custom IC that is 28 inches long end of endtank to end of endtank. 8 inches high and 3 deep. Never used it has 2.5 inch endtanks. Is supposed to flow 700 cfm with only .9 psi pressure drop. Also forsale is 5 silicone connectors that are blue with clamps and one 2.75 to 2.5 inch reducer. Looking to get 300 for the IC and 50 for the connectors and clamps.
can you post on my site at or e-mail fastfreddieparts@yahoo.com
 
Back
Top